You can install flat screen televisions on a wall surface or on a tv stand developed specifically for level screen TVs.
Mount your level screen on a stand so you can easily relocate the tv to accommodate any kind of arrangement of your other furnishings. You can also relocate your level screen from area to room.
Flat display stands can fit televisions from tiny to as large as 75 inches.
Stands location the flat display at the perfect placement for seeing from a seated position. See this source: https://tvwallmounting.ca/how-to-mount-tv-to-stand/
Step 1
Wrap your level screen TV in a soft towel to stop damaging the screen. Eliminate the electric cord ideally, and also disconnect all RCA as well as other linking cords. Location the television face down on a flat surface. Remove the screws (or plugs on some models) to prepare the TV for installing on a stand.
Step 2
Attach adapter brackets to the rear of the television using the screws supplied with the stand or tv. Affix the braces to the matching holes on the back of the tv if your device has more than one collection of installing openings. Tighten the screws to hold the bracket making use of a Phillips screwdriver, however do not over-tighten.
Step 3
Lift the television with the screen facing you. Hook the adapter braces on the back of the tv onto the tv stand plate that holds the TELEVISION. Connect the top bracket initially, after that slowly lower the bottom section of the display until the tv rests versus the accessory plate on the stand.
Step 4
Protect the adapter braces on the back of the level screen to the stand making use of the screws and also tighten up with an Allen wrench or Phillips screwdriver. Tighten the screws until there is no motion of the brackets on the stand attachment plate.